Octagon Shaped

i have a purple octagon plate from the 1930’s. You can see through it. does anyone know what it’s called?

it’s a glass or crystal(not sure) dinner plate from the 1930’s. it’s octagon shaped and a deep purple u can see through. i have the tea cup, saucer and plate. i was told that in the 1930’s the use to give them away in flour sacks. i would like to know what it is. i have had it in my family since 1930. i’d like to collecte more if only i knew the name. some suggested molly. but they didn’t make it in purple.

I believe the purple was called opal ware. Is it of porcelain? Since you can see through it. It is probably made of bone china. Porcelain clay was mixed with powdered bone and this made a real durable china that could be made thin enough to see through.

Octagon Shaped Birdhouse, For 3 Birds, Very Nice!! $8.15

Octagon Shaped Birdhouse, for 3 Birds, Really Nice!! $14.00

1000pc 14×10mm Octagon Shaped foil Flatback facetted YL $21.99

1000pc 14×10mm Octagon Shaped foil Flatback facetted RB $21.99

1000pc 14×10mm Octagon Shaped foil Flatback facetted RD $21.99

1000pc 14×10mm Octagon Shaped foil Flatback facetted ML $21.99

1000pc 10×14mm Octagon Shaped foil Flatback facetted GR $21.99

1000pc 10×14mm Octagon Shaped foil Flatback facetted CL $21.99

In the world of metals and manufacturing, the appearance can be almost anything. Drilling in some respects, is something of an art form. It has been manufactured with presses to drill more than a century. As times change, the drilling of metal is also developing. Some of the principles behind drilling was held constant, always and will always be, while others have progressed in line with advances in metallurgy and technology in general. Thanks to the CNC programming and assisted design Computer, non-traditional patterns have been made available to open the door to unlimited possibilities, like logos and pictures pierced pierced that look like anything you can imagine. However, drilling patterns have changed, the quality of metals and alloys have improved, and the drilling process metal has become far more efficient. But let's talk drilling patterns in particular.

Each pattern drilling, obviously starts with the way the hole. Examples of hole shapes are circular, elliptical, oblong, oval, square, rectangular, hexagonal, octagonal, clover leaf, and triangular. Custom hole forms are also available for the design of a custom tool drilling. Each shape of the hole brings its own aesthetic. The arrangement of the holes can affect the strength of the material drilled. For example, the holes can be drilled in a straight pattern with each hole is perfectly in line horizontally and vertically on the sheet metal. Rows of holes can also be staggered, which is a common practice to maintain strength in the finished product. Patterns of straight and staggered to create two completely different appearances. On the strength however, perfer a round hole in a staggered pattern produces the best overall strength against the open area. Perfer round holes can be more efficient and economical than any other form of the hole because the dies and blows necessary to drill a round hole is the most easier and less expensive to make. Round hole tool also last longer and is easier to maintain. A staggered round hole pattern and the pattern is more commercially common perforated by just these reasons.

The pattern of holes actually has an address on a standard mass produced perforated plate metal. Take note of a perforated plate with a staggered pattern and you will see that the staggering is typically in the short dimension of the blade and the straight lines of the holes run parallel to the longest dimension. As for the size of the hole, whether a rule should be considered. As a rule, when the drilling of tempered steel and aluminum, the diameter of the hole should be at least the thickness of the raw material for reliable tool performance. In the case of stainless steel, in particular, the thickness metal must be at least one gauge thinner than the width hole production safer and more reliable. As a punch patterns in metals Another consideration is the width of the bar, or space between the holes. As with the diameter of the hole, a one to one relationship between the space between the holes is the minimum absolute ease of production with increasing width of the width of separation. The open area is a term used to describe the percentage of metal with holes in Compared with the United Nations solid, perforated metal. The open area of the sheet are taught many of the properties of the finished product, including their appearance, Of course, its weight, its strength, its ability to absorb heat, its ability to absorb sound, and its ability to transmit fluids.

Patterns drilled are carefully selected for the aesthetic appearance of the two, and their performance in the real world as a finished product. The combination of sizes hole, hole shapes, and a variety of drilling techniques to create an almost infinite variety of drilling patterns to choose from.

About the Author:

Chet is a 16+ year employee of Hendrick Manufacturing Company, a leader in producing perforated metal panels and metal sheets. Hendrick Mfg. Co. has been in the business of perforated metal continuously in Carbondale, PA since 1876.

Article Source: ArticlesBase.com – How Patterns and Hole Shapes Can Influence the Uses of Perforated Metal